If your screen says "No Signal", that means it isn't receiving any video from your MiraLink. To troubleshoot this issue, follow these steps:
- If your MiraLink is on, there should be a small blue light. If there is no light, please make sure your MiraLink is plugged into a working power outlet.
- Press and hold the power button until the blue light turns off. Immediately let go once the blue light turns off (if your device has a bumper over the power button, use a pen or paperclip to press and hold the power button).
- Unplug the device from HDMI and power
- Plug the device back into HDMI.
- Plug the power back in. The blue light should turn on.
- Wait 30 seconds for your MiraLink to start displaying video.
- Make sure you're viewing the correct channel on your screen. If your MiraLink is plugged directly into a screen, this should be one of the HDMI inputs. If your MiraLink is plugged into a modulator, please check your modulator settings to confirm which channel your MiraLink's output is displayed on.
If your screen still says "No Signal", please contact us at firstname.lastname@example.org.